Arihant Fittings is established & well versed organized group in a manufacturing of the quality seamless steel pipes. We build an exceptional landmark in gaining clients trust with our valuable quality pipes in the b2b competitive business market segment. We are always looking forward to opportunities from all areas irrespective of harming to human, social and economic values. We marked a good repo in exporting pipes in worldwide network thru legalized channel business partners around the globe.
Seamless Steel Pipes,Seamless Steel Pipes Suppliers,Seamless Steel Pipes Manufacturers in India
Under Loads Strength: It is having greater strength under load. The empty pipe must always support its own weight, but when a pipe is filled with material, it also support that weight as well. Pipe failures & leaks in welded pipes usually occur at the welded seam. Thinner & lighter than other seam pipes. Strong around the entire circumference of the pipe. Work well in unfavorable conditions, e.g. they can be used in extremely cold (tropical) or hot environments.
Increased Pressure Rating (IPR): Seamless Steel Pipes increase its ability to withstand pressure. It is also much easier to determine pressure calculations without being required to take weld quality. Although seamless pipe can sometimes be more expensive than welded pipe, this increased ability to withstand pressure allows you to use pipes that are thinner and lighter, which can help cut down on expenses.
Uniformity of shape (UoS): It add up the heat, stress & other extraneous variables to the forming process, it can never be as round as seamless steel pipe. Seamless steel pipe is a continuous extrusion of the alloy, meaning that it will have a round cross section that you can count on, which is helpful when you’re installing pipes or adding fittings.
As its name implies, no longitudinal weld seam. It is, in essence, one solid homogeneous piece of steel. A solid billet is simply heated & then stretched over a series of mandrels until the pipe has achieved its desired diameter & wall thickness. Seamless steel pipes fourteen inches & greater in diameter are rolled from shells which expand the diameter and reduce the wall until the desired dimensions are achieved. Sizes smaller than fourteen inches in diameter are typically stretch reduced whereby the diameter is gradually reduced & the wall relatively increased via a series of rolls. There is also a cold forming process for seamless pipe production, but such manufacturing processes are typically reserved for different alloys.
Seamless Steel Pipes Processing:
Products polished includes tubular products, with OD and ID polishing available, Round Bar, Square Bar, Hex & Flat bar, Angles, Uneven Leg Angles, beams etc.
Bar & Structural Cutting:
Products cut include Round Bar, Flat bar, Hex bar, square bar, Tubing & Hollow Bar, channels, Beams Pipe, Angles, and Tees. Its thickness ranges from 1/16inch to 28-inch diameter.
Available thru 2inch in Diameter / all schedules.
PC provide production cutting for product diameters up to 4inch. We utilize Amanda Production Equipment (APE) to achieve these precision cuts with tight tolerances.
We as seamless steel pipes manufacturer use good quality raw materials,some of these are given below:
Diameter of Stainless Pipe
1/8inch thru 24inch
300 Series Stainless Steel Grades:
304 – 304/L – 304H – 309/S – 309H – 310/S – 310H – 316L – 317L – 321 – 321H – 347 – 347H.
400 Series Stainless Steel Grades:
Nickel Alloy Grades:
Alloy 20 – 200 – 400 – 600 – 601 – 625 – 825H – 825HT – C276.
We are fully operational and make a convincing mark on the globe with joint collaboration of our esteemed business partners, so that we are capable of providing fine quality products to over 45 countries including UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazil, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angola & Sri Lanka.
Seamless pipes are used for several applications across different industries:
Aircraft parts & racing cars:
These tubes are fitted on the wing of an aircraft in order to measure the aircraft speed.
Some major industrial applications:
It include measuring liquid flow and air flow in tubes and channels, ducts, and stacks during construction.
The prominent tube manufacturer, Arihant Fittings is backed by all the necessary world class certification which incorporated with ISO 14001:2007, 9001:2008, OHSAS 18001:2004 and CE-PED 97/23/EC.We are the fellow member of various acclaimed Chambers of Commerce and agencies which comprises of FICCI, Indian Merchant of Chamber association, EEPC, MASSMA, FIEO etc. We are dealt with 1 year warranty regarding product replacement without any further questioning. We are 100% sure for our in house tested zero defect tube and 3 layer inspection control of mechanical test, chemical test, dimension assessment, pressure test and gauge test. We are normally packed with loads of orders this is why we schedule 90 days prior in advance to avoid last minute rush.
We are one of the seamless steel pipes supplier. we usually recommend to do surface cleaning to remove all impurities within the stock. When it get dried up, then later on it is used to wrap within with thin layered plastic sheets. All the required ends are protected by plastic cap to avoid any unexpected damages with respect to transition from one place to another during transit. At last but not the least the tubing is bundled with bubble wrap followed by colored plastic goonies or set of bundles.The outer rope is tied to protect the seamless steel pipes which are packed in wooden box as final finishing to the qualitative packaging.We follow all this process so that the customer will able to track or identified its ordered product (seamless steel pipes) safely at receiving end. We are giving emphasis on packing as much as production and like to make seamless buying experience for customer.We provide tube with required documents prior to dispatch of tube from home mill unit, such as packing list, commercial invoice, Test Reports, HS Code, Country of Origin attested by chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates.On client request we also provide a free sample kit against purchase order copy. The client just need to click on “Request your free sample kit now!” button on our digital online web link.
We at ARIHANT FITTINGS stock and outsource SEAMLESS STEEL pipes from ½” OD to 48” OD.
We provide the following value addition to the pipes:
Cut To Length: Pipes can be supplied in full sizes or cut to length as required by the clients.
Beveling: Pipes can be bevelled at the ends to make it suitable for welding purposes and other applications.
Polishing: Pipes can be polished for mirror finish of various classes such as #4,#6,#7 class finish.
Heat Treatment: To change the mechanical properties of Pipes and make it suitable for some applications, Steel Pipes can also undergo heat treatment process.
Positive Material Identification: We have an in-house PMI machine to identify all the pipes while arrival and dispatch so as the pipes match to order specifications and client requirements.
Suggestions: We offer various suggestions and alternatives depending on the client size and application requirements.
Threading: We can also providing external threading to the pipes, in NPT, BSPT & BSPP threads if required by the clients.
SEAMLESS STEEL PIPES supplied by ARIHANT FITTINGS are procured from A-Class mills around the world. We provide Steel Pipes of European, Japanese, Chinese and Indian origin. Our intelligent procurement system tracks real-time prices of SEAMLESS STEEL Pipes. It also keeps check on the quality and the quantity of the product in stock.
We are able to provide rock bottom prices to the customers with immediate delivery for small and major needs in standard sizes.
Our clients get some value added benefits, if they buy the products from our qualitative stock:
Stainless Steel Pipe Polishing:
Stainless steel pipe item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless steel polished pipes can also be cut to size.
Heatreating & Annealing:
Some grades of stainless steel pipe can be heatreated to change its mechanical property.
Positive Material Identification (PMI):
We do in house testing for most of the stainless steel grades. We can work with independent labs to complete PMI in order to meet customer requirement.
UT testing is quite prominent for the stainless steel plates may be required. We can assist you with this requirement.
Stainless Steel Pipe Honing / Turning:
It is using a precision abrasion process in order to obtain a desired finish / close dimensional tolerance.
Stainless Steel Pipe Beveling:
It can bevel the edges of stainless steel plate to prepare for welding and other processes.
We do comply with same day shipping of goods policy once we get approved confirmed order receipts from respective or potential clients.
We make world class buying experience for clients. So that the client will revert back with sound feedback and this will leads to reimbursement of bulk orders and mouth to mouth marketing for our esteemed group.